>>Motor with sheilded poles, either with bronze or ball bearings, and with thermal cut-out.
>>Motor support and grille made of anti-UV ABS.
>>High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
>>The standard models can be speed regulated.
>>Protection rating: IPX4.
>>Insulation class: II
>>Motor with sheilded poles, either with bronze or ball bearings, and with thermal cut-out.
>>Motor support and grille made of anti-UV ABS.
>>High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
>>The standard models can be speed regulated.
>>Protection rating: IPX4.
>>Insulation class: II
>> Size : 100,150,200,250,300 & 350 mm Dia.
>> RRD is made of spindled Aluminium sheet
>> Core Blade are fixed. Core is removable.
>> Powder coated to RAL 9010/9016 as standard finish.
>> RRD can be installed by a screw at the face center as standard, or at rear bracket as optional.
>> Size: W x H - (150,225,300,450,525,600) mm - (Neck size)
>> Flush mounted type with four-way discharge.
>> Core is fixed to the frame by the action of spring-loaded pins, It is easily removable to allow for maximum flexibility in installation, maintenance, damper adjustment, and pattern exchange.
>> Stainless steel clips are fixed at the frame corners to assure maximum tightness and rigidity for the diffuser construction.
>> Insulating gasket is fixed around the back of the frame to prevent infiltration between the frame and the ceiling.
RIGID PVC CONDUIT 20 / 1.8MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 25 / 1.9MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 32 / 2.5MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 38 / 2.5MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 50 / 3.2MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 20 / 1.8MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 25 / 1.9MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 32 / 2.5MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 38 / 2.5MM - HEAVY GAUGE BLACK
RIGID PVC CONDUIT 50 / 3.2MM - HEAVY GAUGE BLACK
>> Size : 100,125,150,200,250 & 300 mm Dia
>> 0.9 mm Thick galvanized steel frame & Blades.
>> 1/2 " square hollow aluminium extruded profile axles.
>> Self lubricating plastic bushes.
>> Plated steel with wing nut to lock the blades position quadrant, marked to show the position of the blades.
>> Foam Gasket Seal.
