>>Induction motor with thermal protection.
>>Protection grille on the intake port.
>>Special antivibration gasket for silent operation.
>>IMQ Performance
>> Fan provides high aair floe rate combined with pressure suitable for application when long ducts are used.
By-Pass Variable Air Volume Terminal
>> Casing is made of 0.9mm & damper blade is made of 1.2mm; galvanized steel sheet.
>> Blades are with rubber gasket, and self-lubricating plastic bushes.
>> Damper shaft is made of solid square ½X½ inch G.I.
>> Acoustically and thermally insulated with 1” thick glass fiber material 24kg/m3 that conform to NFPA-90A & 255, UL 181 and ASTM C665.
>> Adjustable sliding-type by-pass outlet.
>> Flanges at inlet & discharge openings.
>> Responses proportionally to cooling requirements by changing the air volume supplied to space to be air conditioned while relieves conditioned air to the return ceiling plenum or duct.
>> EBP maintains a constant air volume across the central system while it supplies a variable air volume to the space.
>> With BELIMO - LM24ASR Actuator for model EBP-1 to EBP-4, NM24ASR actuator for Model EBP-5 TO EBP-8 , SIEMENS - RDU340 thermostat & With TRANSFORMER (LOCAL)
>>Pickled and phosphated steel structure.
>>One speed.
>>Backward curved centrifugal impeller.
>>High efficient AC motor with shaft turning in ball bearings.
>>Low noise emissions.
>>Low specific consumption.
>>Wide range of continuous operation temperatures between -25° C and +50° C.
>>Mounting bracket made of galvanized steel included.
>>Protection rating: IP44.
>>Insulation class: II
>> Size - 100,125,150 & 200 mm Dia.
>> DVR is made of steel sheet.
>> Adjustable Disc.
>> Power coated to RAL 9010/9016 as standard finish.
>> DVR is installed by a built-in rear frame.
>> The gravity air louver is a wall mounted device. It is composed of a set of horizontally mounted blades; they are normally closed and are free to rotate about the horizontal axis.
>> The blades & frame are manufactured from aluminum extruded profiles.
>> Horizontally mounted blades are available with Brass bushes.
>> It is Provided with GI insect Screen.
>> Power coated to RAL 9010/9016 as standard finish.
>> Size : 100,150,200,250,300 & 350 mm Dia.
>> RRD is made of spindled Aluminium sheet
>> Core Blade are fixed. Core is removable.
>> Powder coated to RAL 9010/9016 as standard finish.
>> RRD can be installed by a screw at the face center as standard, or at rear bracket as optional.
>> Size: W x H - (150,225,300,450,525,600) mm - (Neck size)
>> Flush mounted type with four-way discharge.
>> Core is fixed to the frame by the action of spring-loaded pins, It is easily removable to allow for maximum flexibility in installation, maintenance, damper adjustment, and pattern exchange.
>> Stainless steel clips are fixed at the frame corners to assure maximum tightness and rigidity for the diffuser construction.
>> Insulating gasket is fixed around the back of the frame to prevent infiltration between the frame and the ceiling.
>> Size : 100,125,150,200,250 & 300 mm Dia
>> 0.9 mm Thick galvanized steel frame & Blades.
>> 1/2 " square hollow aluminium extruded profile axles.
>> Self lubricating plastic bushes.
>> Plated steel with wing nut to lock the blades position quadrant, marked to show the position of the blades.
>> Foam Gasket Seal.
>> Size : 100,150,200,250,300 & 350 mm Dia.
>> SRD is made of spindled Aluminium sheet
>> Core Blade are fixed. Core is removable.
>> Powder coated to RAL 9010/9016 as standard finish.
>> SRD comes with black butterfly damper made of GI.
>> SRD can be installed by the rear bracket of the damper.
>> Size: W x H - (150,225,300,450,525,600) mm - (Neck size)
>> Flush mounted type with four way discharge.
>> Core is fixed to the frame by the action of spring loaded pins, It is easily removable to allow for maximum flexibility in installation, maintenance, damper adjustment and pattern exchange.
>> Stainless steel clips are fixed at the frame corners to assure maximum tightness and rigidity for the diffuser construction.
>> Insulating gasket is fixed around the back of the frame to prevent infiltration between the frame and the ceiling.
>> With easily removable opposed blade damper, attached to the frame by means of stainless steel (S) shape clips to ensure tight attachment with maximum flexibility.
Finishing:
>> Powder coated to RAL 9010/9016.
